0

Free nationwide delivery on all online orders over 300 RON (without VAT).
Code:
Product Name:
{$prname1}



The fields marked with * are mandatory!
{#Order end time#} {#Delivery end time#}
09:30 11:30
10:30 12:30
13:30 15:30
14:30 16:30
Featured products in this category: 20
Provides a Standard VGA port to any board with Pmod connectivity; 12-bit RGB444 color depth; supports pixel clocks up to 150 MHZ
PmodVGA
DIGILENT
Provides a Standard VGA port to any board with Pmod connectivity; 12-bit RGB444 color depth; supports pixel clocks up to 150 MHZ
Crypto Kit UDFN Socketed XPRO Development Board
AT88CKSCKTUDFN-XPRO
MICROCHIP
Crypto Kit UDFN Socketed XPRO Development Board
4-phase Stepper Motor; Step angle: 5.625°/25; Accuracy: 5.625°±7%; DC 5V; Winding resistance 120?±10% at 25°C; Pull-in torque: 200g.cm min100pps DC5V
Stepper Motor
DIGILENT
4-phase Stepper Motor; Step angle: 5.625°/25; Accuracy: 5.625°±7%; DC 5V; Winding resistance 120?±10% at 25°C; Pull-in torque: 200g.cm min100pps DC5V
Pmod CAN: CAN 2.0B Controller with Integrated Transceiver; Based on Microchip MCP25625; Up to 1 Mb/s; Up to 10 MHz SPI clock
PmodCAN
DIGILENT
Pmod CAN: CAN 2.0B Controller with Integrated Transceiver; Based on Microchip MCP25625; Up to 1 Mb/s; Up to 10 MHz SPI clock
Adapters and cables for the Atmel-ICE debugger. Supports 10-pin 100mil - 20-pin 100mil - squid 100mil - 6-pin 100 mil and 10-pin 50mil connectors
ATATMEL-ICE-ADPT
MICROCHIP
Adapters and cables for the Atmel-ICE debugger. Supports 10-pin 100mil - 20-pin 100mil - squid 100mil - 6-pin 100 mil and 10-pin 50mil connectors
Adapter Board for Uno R3 Standard to Pmod; Compatible with the uC32, WF32, Wi-FIRE, PYNQ, Arty boards
PmodSHIELD
DIGILENT
Adapter Board for Uno R3 Standard to Pmod; Compatible with the uC32, WF32, Wi-FIRE, PYNQ, Arty boards
Digital Humidity and Temperature Sensor; Based on TI HDC1080
PmodHYGRO
DIGILENT
Digital Humidity and Temperature Sensor; Based on TI HDC1080
For use with Cerebot™ boards; Measuring range: 10-80 cm; Supply: 4.5-5.5V/30mA typ.; Includes 10" 3-wire cable
IR Range Sensor
DIGILENT
For use with Cerebot™ boards; Measuring range: 10-80 cm; Supply: 4.5-5.5V/30mA typ.; Includes 10" 3-wire cable
microSD card breakout to Pmod™ Port or 2.7-3.6 V logic level; 1-bit and 4-bit communication
PmodMicroSD
DIGILENT
microSD card breakout to Pmod™ Port or 2.7-3.6 V logic level; 1-bit and 4-bit communication
WiFi Interface 802.11g; Based on Microchip® MRF24WG0MA Wi-Fi™ radio transceiver module; Integrated PCB antenna; 43?20mm
PmodWiFi
DIGILENT
WiFi Interface 802.11g; Based on Microchip® MRF24WG0MA Wi-Fi™ radio transceiver module; Integrated PCB antenna; 43?20mm
Pair of standard RJ45 (8P8C) port; Male and female connectors for host and peripheral connectivity
PmodRJ45
DIGILENT
Pair of standard RJ45 (8P8C) port; Male and female connectors for host and peripheral connectivity
Differential Pressure Gauge Sensor; 0-10 kPa differential pressure range; Based on NXP MP3V5010DP piezoresistive transducer and TI ADCS7476 12-bit ADC
PmodDPG1
DIGILENT
Differential Pressure Gauge Sensor; 0-10 kPa differential pressure range; Based on NXP MP3V5010DP piezoresistive transducer and TI ADCS7476 12-bit ADC
Pmod Expansion for Raspberry Pi; Supports SPI, UART, I2C, GPIO
PmodHAT
DIGILENT
Pmod Expansion for Raspberry Pi; Supports SPI, UART, I2C, GPIO
Color Sensor Module; Based on AMS TCS3472 with integrated IR blocking filter; White LED for reflective measurements
PmodCOLOR
DIGILENT
Color Sensor Module; Based on AMS TCS3472 with integrated IR blocking filter; White LED for reflective measurements
Digital Gas Sensor for Air Quality; Based on AMS CCS811
PmodAQS
DIGILENT
Digital Gas Sensor for Air Quality; Based on AMS CCS811
Factory calibrated two-axis resistive joystick; Center joystick button; Embedded PIC16F1618 MCU; 24-bit RGB LED
PmodJSTK2
DIGILENT
Factory calibrated two-axis resistive joystick; Center joystick button; Embedded PIC16F1618 MCU; 24-bit RGB LED
Bluetooth Low Energy Interface; Bluetooth® Smart 4.2 BLE compatible; Intgrated RN4870 module
PmodBLE
DIGILENT
Bluetooth Low Energy Interface; Bluetooth® Smart 4.2 BLE compatible; Intgrated RN4870 module
Wireless Communication Module based on Expressif ESP-WROOM-32
PmodESP32
DIGILENT
Wireless Communication Module based on Expressif ESP-WROOM-32
Multi-Touch Display System; PIC32MZ + 2.8' QVGA 320x240; For use with Arduino, chipKIT and Arty platforms
PmodMTDS
DIGILENT
Multi-Touch Display System; PIC32MZ + 2.8' QVGA 320x240; For use with Arduino, chipKIT and Arty platforms
9-axis IMU + Barometer; LSM9DS1 3-axis accelerometer, 3-axis gyroscope, 3-axis magnetometer + LPS25HB MEMS pressure sensor: 260-1260 hPa
PmodNAV
DIGILENT
9-axis IMU + Barometer; LSM9DS1 3-axis accelerometer, 3-axis gyroscope, 3-axis magnetometer + LPS25HB MEMS pressure sensor: 260-1260 hPa
Search within category - Products found:
Results per page
Price ranges
Scroll to top